Spike Brewing | Conical Accessories

Out of all the ways to attach silicone tubing to your brew kettle or conical we like quick connect ball lock fittings the most. The ease of connect...

Fermenters and bottom drain Tanks aren't supposed to be lifted when full, so if you must move it how are you going to do it? Easy! Pick yourself u...

Set of replacement Silicone Seals for Spike Brewing's 1.5 inch TC Sample Port Kit includes 3x seals (as pictured) FDA Approved Stainless Steel S...

After years of using 1.5” butterfly style valves, the gasket inside tends to wear and not seal as well.  This 1.5” valve seat is available as rep...

After years of using 2” butterfly style valves, the gasket inside tends to wear and not seal as well. This 2” valve seat is available as replacem...

Another cool product Spike's engineers and in-house welders developed is this USA made racking arm. This racking arm provides 6" of total travel a...

Designed to attach directly to the 1.5" TC port on your fermenter's lid, this manifold allows you to easily add pressure for transferring to kegs...

Another cool innovation from the Spike engineers; a low pressure CIP ball! They wanted to design a CIP ball that didn’t require home brewers to pu...

Spikes closed pressure transfer kit (CPT kit) will allow you to rack your beer from your conical to keg without exposing it to the air. This wi...

Spike's engineers have totally redesigned the 2" TC sight glass from the ground up! Standard sight glasses use 4 long bolts that need to be tigh...

The shorty leg extensions are 9” long (compared to 18”). They were specifically designed to be used with the 2” sight glass in the vertical arrange...

Spike's thermowell features a 1/4" temp probe opening on the outside which is mounted to a 1.5" TC fitting. This allows it to attach directly to ...

Moves coolant from the reservoir to the fermenter. Uses DC power which is much safer than an AC powered submersible pump.  All pumps are n...

Spike's USA made temp control coils are specifically designed for the CF series conicals and extend far enough into the conical to temp control bo...

"At Spike we love quick connect fittings. Why use tools when you don't need to!? These 90° quick connect fittings will make attaching insulated t...

The TC100 temp control system will manage both cooling and heating of your Spike Conical. The digital controller's temp probe will feed int...

The Spike All-In-One Pressure Relief Valve (PRV) puts your safety first without compromising on features or functionality. And when you're dealin...

Another Spike innovation that we think solves two big issues. The obvious benefit from insulated lines is increasing your cooling efficiency from ...

For all the brewers out there who’ve switched from clear carboys to stainless we hear this unanimous complaint: I can't see my beer fermenting any...

Spike's conicals come equipped with this 100% sanitary 1.5” TC butterfly valve. This valve has a squeeze locking/trigger handle that allows for 180...

If you didn't already know the Spike Conical is a unitank! This means it is designed to handle pressures up to 15psi. This capability allows yo...

Not all hose barbs are created equal! Spike's special 1.5" TC x barb fitting features a shorter profile and over sized diameter barb. The over siz...

Not all hose barbs are created equal! Spike's special 2" TC x barb fitting features a shorter profile and over sized diameter barb. The over sized ...

Need to heat your conical during the long Winter months? Want to make a Belgian ale with notes of pears, bananas, bubblegum, anise or even rose pet...

An oxygenation kit specifically designed for homebrewing. Oxygenate your wort easily and conveniently with a precise amount of oxygen rather than...

Spike Brewing's 4” TC gaskets are made of FDA approved EPDM. These will work with both our conicals and kettle applications. These gaskets are rate...

Designed to keep oxygen out during fermentation, the stainless-steel Blow-off Cane can go directly into a bucket of sanitizer during primary ferme...

Out of all the ways to attach silicone tubing to your brew kettle or conical we like quick connect ball lock fittings the most. The ease of connect...

Spike's engineers have totally redesigned the 1.5" TC sight glass from the ground up! Standard sight glasses use 4 long bolts that need to be ti...

This elbow will connect to any 1.5" TC port. It features an oversized barb designed to use with 1/2" tubing. This creates a full port opening for ...

Looking for the perfect 2” sanitary valve for your conical? Well look no further! These valves are commonly seen in professional breweries due to t...

Spike's extended bracing shelf was a solution created based on customer feedback on the normal bracing shelf. The extended bracing shelf now wide...

Designed to keep oxygen out during fermentation, the stainless-steel Blow-off Cane can go directly into a bucket of sanitizer during primary ferme...

Spike's extended bracing shelf was a solution created based on customer feedback on the normal bracing shelf. The extended bracing shelf now wide...

A standard clamp for all 4" TC ports. Designed for Spike Conical lids. Specs:  4" Tri-Clover Clamp 304SS

Broke your lid gasket? We keep extras stocked! Spike's gasket is a one piece design made from FDA approved Silicone. This design allows for an eas...

The TC-100 temp control system will manage both cooling and heating of your FLEX. The digital controller's temp probe inserts into the incl...

When pressurizing your Spike Conical you'll always want to use a pressure relief valve (PRV). This will prevent the tank from being over pressuriz...

Tank Racking Arm Attach this racking arm to the racking port on your bottom drain Tank Boil Kettle or Solo to ensure only the highest quality wor...

"If you didn't already know the Spike Conical is a unitank! This means it is designed to handle pressures up to 15psi. This capability allows y...

The Spike dual stage temperature controller is an easy to use and economical controller that is perfect for home brewing. Spike controllers allow y...

This Spike Brewing Tri-Clover end cap is made out of strong 304 Stainless Steel.It is designed to be used with a TC gasket and clamp to make a sani...

Spike's extended bracing shelf is a recommended addition when casters or leg extensions are installed. The extended bracing shelf widens the sta...

Broke your lid gasket? We keep extras stocked! Spike's gasket is a one piece design made from FDA approved Silicone. This design allows for an ea...