Brewing Equipment

Clear Gasket (1/2") for B, C, D & Dust Caps This food-grade, FDA-approved gasket offers a perfect fit for your B, C, D couplers and dust caps ...

The Stainless Bucket Fermenter is the perfect fermentation vessel for 5-6 gallon batches. The small design enables it to easily fit inside a refrig...

Hydrometer with built in thermometer, measures liquid density or specific gravity (S.G) to monitor fermentation and sugar levels.  Helps homebrewer...

These caps have an O2-scavenging liner that can help reduce oxidation. Fits standard, pry-off beer bottles. Not for with use twist-off bottles. The...

Sturdy, vented plastic stand holds an inverted carboy steady to let it drip dry, inside and out. Stackable.

Designed to attach directly to the 1.5" TC port on your fermenter's lid, this manifold allows you to easily add pressure for transferring to kegs...

The Grainfather Whirlpool and Aeration Brewing Paddle provides an excellent whirlpool by allowing the perfect amount of liquids and solids to pas...

This filter is designed to fit a wort aeration system with a pump. Filters down to .023 micron with 99.99% efficiency. Use with 3/8" ID tubing (1/4...

This 1.5" tri-clamp cap, crafted from high-quality stainless steel, is your trusty companion for sealing unused ports on your tri-clamp system in y...

Glass wine & beer lab thermometer. Range: -20+110 / +0+220Unit: °C / °FDiv.: 1 / 2Accuracy: ± 2Length mm: 305

#5 - This rubber stopper is for typical Big Mouth glass carboys, test tubes, flask stoppers or other bottles. Size: 5 TopDiameter: (27mm 1-1/16') B...

This versatile 1.5" tri-clamp x ½" male NPT adapter is your bridge between the worlds of tri-clamp and threaded connections in your homebrew setup!...

The RipTide™ is the very first pump designed specifically for homebrewing, and it’s the last pump you’ll ever need! Gone are the days of making do ...

Spikes closed pressure transfer kit (CPT kit) will allow you to rack your beer from your conical to keg without exposing it to the air. This wi...

Use in conjunction with the Grainfather Connect Control Box thermometer, for accurate control of your wort transfer temperature through the Grainfa...

Seal the Deal: 2" Stainless Steel Tri-Clamp Cap This 2" tri-clamp cap is your go-to solution for securely closing off unused ports in your homebrew...

Solid core, no airlock hole. Plastic bung with longer taper. Fits a wider range of demi-johns and carboys. Lip prevents bung from falling into carb...

The Brewer's Best Deluxe Starter Equipment Kit includes all of the equipment you need to brew your own beer except for a pot, bottles and caps (ca...

Propylene glycol is the active cooling ingredient used in the Grainfather Glycol Chiller. You will need 3 liters of glycol for the chiller. Chiller...

This stainless steel cast pipe fitting is a 90-degree street elbow with male National Pipe Taper (NPT) threads on one end and female NPT threads on...

Spike's engineers have totally redesigned the 2" TC sight glass from the ground up! Standard sight glasses use 4 long bolts that need to be tigh...

The shorty leg extensions are 9” long (compared to 18”). They were specifically designed to be used with the 2” sight glass in the vertical arrange...

Spike's thermowell features a 1/4" temp probe opening on the outside which is mounted to a 1.5" TC fitting. This allows it to attach directly to ...

Moves coolant from the reservoir to the fermenter. Uses DC power which is much safer than an AC powered submersible pump.  All pumps are n...

Easily attach to the Grainfather Conical Fermenter (or any fermenter with a 1.5" tri-clamp opening) for a clean and simple way to transfer your be...

Spike's USA made temp control coils are specifically designed for the CF series conicals and extend far enough into the conical to temp control bo...

This 1.5" tri-clamp elbow is your secret weapon for navigating tight spaces and creating efficient flow paths in your homebrew setup! Sharp 90° T...

"At Spike we love quick connect fittings. Why use tools when you don't need to!? These 90° quick connect fittings will make attaching insulated t...

The TC100 temp control system will manage both cooling and heating of your Spike Conical. The digital controller's temp probe will feed int...

The Spike All-In-One Pressure Relief Valve (PRV) puts your safety first without compromising on features or functionality. And when you're dealin...

Another Spike innovation that we think solves two big issues. The obvious benefit from insulated lines is increasing your cooling efficiency from ...

For all the brewers out there who’ve switched from clear carboys to stainless we hear this unanimous complaint: I can't see my beer fermenting any...

This 29mm bell housing fits Emily Capper and most bench cappers.  A wider bell housing to fit European champagne bottles, installs in less than a m...

This tee is a stainless steel t-shaped pipe fitting with three National Pipe Taper (NPT) female run connections.  The fitting has NPT threads for c...

Spike's conicals come equipped with this 100% sanitary 1.5” TC butterfly valve. This valve has a squeeze locking/trigger handle that allows for 180...

This 2" tri-clamp ferrule is a workhorse for creating permanent connections in your homebrew setup or sanitary pipeline system. Here's how it works...

Durable BPA-free PET plastic fermentor, with a 4" wide mouth big enough to fit your whole hand. 4" Wide Mouth BPA-free PET Plastic Includes airtig...

The Grainfather Conical Fermenter Coat is the perfect fitment for those in a climate that experiences high condensation rates.

Control your fermentation temperature accurately, every time! Temperature control is one of the most crucial elements for producing a good quality ...

Efficient, fast, and versatile. This Blichmann burner is appropriately named HellFire™! This dual mode capability burner is unlike anything else o...

Smooth Transitions: 2" to 1.5" Tri-Clamp Reducer This stainless steel reducer seamlessly connects your 2" and 1.5" tri-clamp pipes. The conical des...