Couplers, Barbs & Nipples
Stainless steel brewing fittings are perfect for setting up and plumbing your home brewery with ease. While the most common size fittings are 1/2 inch, we offer a wide variety of sizes and connections, allowing you to customize your brewery according to your specific needs and preferences.
Stainless Steel 3/8" Hose Barb (1/2" MPT)
This versatile 316 stainless steel adapter tackles your toughest homebrew connections! Here's why it's a must-have: Superior Corrosion Resistance...
View full detailsTri-Clamp - 1.5" TC x 1/2" Hose Barb
This 1.5" tri-clamp x ½" hose barb is your go-to solution for connecting hoses directly to your tri-clamp system in your homebrew setup! Effortle...
View full detailsStainless Steel 1/2" Coupler (Machined)
Durable Stainless Steel: Resists corrosion for long-lasting performance, perfect for handling wort, coolant, or liquids in your plumbing system. ...
View full detailsStainless Steel 5/8" Hose Barb (1/2" MPT)
This barbed tube connector is made of stainless steel and has a 5/8" barbed connection on one end and a 1/2" male MPT threaded connection on the ot...
View full detailsStainless Steel Hex Nipple (1/2")
This stainless steel 316 hexagonal nipple is a pipe fitting with 1/2" male National Pipe Taper (NPT) threads on both ends for connecting and extend...
View full detailsSpike Brewing | Stainless Steel Female Quick Connect to 5/8” Barb
Out of all the ways to attach silicone tubing to your brew kettle we like quick connect fittings the most. The ease of connecting/disconnecting an...
View full detailsStainless Steel 1/2" Hose Barb (1/2" FPT)
Stainless Steel Hose barb. 1/2" barb with 1/2" FPT connection. 304 Stainless Steel. Secure Hose Connection: The 1/2" barb creates a leak-proof se...
View full detailsStainless Steel 3/8" Hose Barb Elbow (1/2" MPT)
This stainless steel cast pipe fitting is a 90-degree street elbow with female National Pipe Taper (NPT) threads on one end and barbed connection o...
View full detailsStainless Steel 1/2" Close Nipple
Unmatched Leak Protection: NPT threads across its entire length provide a tighter seal than straight threads on both ends, eliminating leaks in y...
View full detailsStainless Steel 1/2" Hex Plug
This 304 stainless steel hex plug is your handy tool for plugging unused 1/2" NPT threads in your homebrew setup! Here's why it's useful: Plugs N...
View full detailsFaucet Coupling Nut
Replacement for the coupling nut on a standard beer shank. The threads mate with a standard beer faucet.
Tri-Clamp - 2" TC x 1/2" Hose Barb
Craft Connections: 2" Tri-Clamp to 1/2" Hose Barb Adapter This stainless steel adapter is your secret weapon for connecting your tri-clamp system t...
View full detailsStainless Steel Reducer Coupler (3/4" x 1/2")
This 3/4" FPT x 1/2" FPT Stainless Steel Concentric Reducer Coupling simplifies connections between pipes of different diameters in your homebrew s...
View full detailsStainless Steel Female Quick Connect to 1/2” Barb
The female quick connect seals up very well without a lot of work when connecting. Will work with other SS quick connects (although, it does not w...
View full detailsBrass 1/4" Hose Barb (1/4" MPT)
Recommended for gas fittings. 1/4" barb x 1/4 MPT brass.
Stainless Steel Coupler - 3/8" Female NPT x 3/8" Female NPT
Coupling for connecting and extending pipes going in the same direction. Female National Pipe Taper (NPT) threads for connecting two 3/8" male pipe...
View full detailsSanke Keg Coupler Part - Body Seal
The Body Seal keg coupler part provides a secure and airtight connection between the coupler and keg, preventing leaks and maintaining consistent p...
View full detailsStainless Steel Reducer Coupler (3/8" x 1/4")
This 3/8" FPT x 1/4" FPT Stainless Steel Concentric Reducer Coupling is your go-to solution for connecting pipes of different diameters in your hom...
View full detailsKeg Coupler Check Valve
This Thomas Valve keg coupler part is designed for precise and reliable connection to compatible kegs, ensuring optimal flow and pressure control. ...
View full detailsDuotight | 8mm (5/16") Plug
These duotight plugs are used to block up your 8mm (5/16") tee's elbows or fittings for gas leak testing or simply to plug an unused section. No cl...
View full detailsStainless Steel Male Quick Connect to 5/8” Barb Fitting
Out of all the ways to attach silicone tubing to your brew kettle we like quick connect ball lock fittings the most. The ease of connecting/discon...
View full detailsStainless Steel 1/2" Hose Barb (1/2" MPT)
Leak-Proof Connection: The 1/2" barb ensures a tight seal on your hoses, ideal for transferring wort, coolant, or cleaning solutions without leak...
View full detailsSpike Brewing | Stainless Steel 1.5" TC x 5/8" Barb
Not all hose barbs are created equal! Spike's special 1.5" TC x barb fitting features a shorter profile and over sized diameter barb. The over siz...
View full detailsSpike Brewing | 2” Tri-Clamp to 5/8” Barb
Not all hose barbs are created equal! Spike's special 2" TC x barb fitting features a shorter profile and over sized diameter barb. The over sized ...
View full details