Hose Barbs

Not all hose barbs are created equal! Spike's special 2" TC x barb fitting features a shorter profile and over sized diameter barb. The over sized ...

This elbow will connect to any 1.5" TC port. It features an oversized barb designed to use with 1/2" tubing. This creates a full port opening for ...

Recommended for gas fittings. 3/8" barb x 1/4 MPT brass.

Use this inline ball valve to shut off the flow in your air line. Simply secure it with screw or tab clamps and you'll be in control in no time. Th...

This Ball Lock beverage fitting is barbed so you can attach beer line send dispense from ball lock kegs.

High quality CM Becker Brand Ball Lock Quick Disconnects. Keep in mind that black is for beverage.

High quality CM Becker Brand Ball Lock Quick Disconnects. Keep in mind that grey is for gas, black is for beverage.

High quality CM Becker Brand Ball Lock Quick Disconnects. Keep in mind that grey is for gas, black is for beverage.

High quality Shirron Brand Ball Lock Quick Disconnects. Keep in mind that gray is for gas.

Includes: 1x Ball Lock Cornelius Keg MFL Gas Disconnect 1x Ball Lock Cornelius Keg Barbed Beverage Disconnect 1x Stainless Steel Swivel Nut - 1/4...

Use this inline ball valve to shut off the flow in your beer or air line. Simply secure it with screw or tab clamps and you'll be in control in no ...

High quality German-made Pin Lock Quick Disconnects. This Pin Lock Liquid Fitting works well with 1/4" tubing because you get a much tighter connec...

High quality German-made Pin Lock Quick Disconnects. This Pin Lock Liquid Fitting works well with 1/4" tubing because you get a much tighter connec...

Not all hose barbs are created equal! Spike's special 1.5" TC x barb fitting features a shorter profile and over sized diameter barb. The over siz...

This barbed tube connector is made of type 316 stainless steel and has a 3/8" barbed connection on one end and a 1/2" male NPT threaded connection ...

This stainless steel cast pipe fitting is a 90-degree street elbow with female National Pipe Taper (NPT) threads on one end and barbed connection o...

This barbed tube connector is made of stainless steel and has a 5/8" barbed connection on one end and a 1/2" male MPT threaded connection on the ot...

Still the most popular item for  homebrewers, Type C Couplers are typically used with Type E Adapters but can also be used with Type A and F Adapte...

Type E Adapters are typically used with Type C Couplers, but can also be used with Type B and D Couplers or DC (Dust Cap) of the same size.

This beer line hose splicer is for splicing together two 3/16" I.D. vinyl hose to a 1/4" I.D. polyethylene hose or a 1/4" I.D. polyethylene hose to...

This beer line hose splicer is for splicing together two 3/16" I.D. vinyl hose to a 1/4" I.D. polyethylene hose or a 1/4" I.D. polyethylene hose to...

Out of all the ways to attach silicone tubing to your brew kettle we like quick connect fittings the most. The ease of connecting/disconnecting an...