All Products
Propylene Glycol (1 Gallon)
Propylene Glycol (1 Gallon) for use with Glycol Chillers.
Spike Brewing | Stainless Steel 1.5” Tri-Clamp to Quick Connect
Out of all the ways to attach silicone tubing to your brew kettle or conical we like quick connect ball lock fittings the most. The ease of connect...
View full detailsSpike Brewing | 1.5” Stainless Steel Tri-Clamp Stainless Steel Thermowell
Spike's thermowell features a 1/4" temp probe opening on the outside which is mounted to a 1.5" TC fitting. This allows it to attach directly to ...
View full detailsSpike Brewing | Tri-Clamp Carb Stone and Gas Manifold Bundle
"If you didn't already know the Spike Conical is a unitank! This means it is designed to handle pressures up to 15psi. This capability allows y...
View full detailsSpike Brewing | Insulated Conical Jacket
Spike's insulated conical jacket uses high quality, extra thick, yet flexible neoprene material to insulate your conical from the worst ambient con...
View full detailsSpike Brewing | Caster Wheel Kits
Fermenters and bottom drain Tanks aren't supposed to be lifted when full, so if you must move it how are you going to do it? Easy! Pick yourself u...
View full detailsSpike Brewing | Replacement Seals - TC Sample Valve
Set of replacement Silicone Seals for Spike Brewing's 1.5 inch TC Sample Port Kit includes 3x seals (as pictured) FDA Approved Stainless Steel S...
View full detailsSs Brewtech Pressurized Transfer Kit
This kit is designed for owners of Standard Chronical Fermenters and includes everything you need to perform a pressurized transfer. Simply attach...
View full detailsSpike Brewing | 1.5" Butterfly Valve Seat
After years of using 1.5” butterfly style valves, the gasket inside tends to wear and not seal as well. This 1.5” valve seat is available as rep...
View full detailsSpike Brewing | 2" Butterfly Valve Seat
After years of using 2” butterfly style valves, the gasket inside tends to wear and not seal as well. This 2” valve seat is available as replacem...
View full detailsGrainfather Conical | Digital Temperature Controller
The Grainfather Digital Temperature Controller replaces the temperature display. With this you can control the heating and the cooling (if you hav...
View full detailsBlichmann Engineering - Spunding Valve Pressure Gauge
Replacement pressure gauge for the spunding valve
Grainfather | Conical Fermenter Replacement Hoses for Connection Kit
2 x 2 m (6.5 ft) replacement hoses for the Grainfather Conical Fermenter Cooling Connection Kit
Spike Brewing | 1.5 Tri-Clover Racking Arm
Another cool product Spike's engineers and in-house welders developed is this USA made racking arm. This racking arm provides 6" of total travel a...
View full detailsSpike Brewing | 3 Port Stainless Steel Gas Manifold Bundle for Spike Conical Fermentors
Designed to attach directly to the 1.5" TC port on your fermenter's lid, this manifold allows you to easily add pressure for transferring to kegs...
View full detailsSpike Brewing | CIP Spray Ball - 1.5” Tri-Clover
Another cool innovation from the Spike engineers; a low pressure CIP ball! They wanted to design a CIP ball that didn’t require home brewers to pu...
View full detailsClosed Pressure Transfer Kit | Spike Brewing
Spikes closed pressure transfer kit (CPT kit) will allow you to rack your beer from your conical to keg without exposing it to the air. This wi...
View full detailsFermZilla | Liquid/Gas Post Connection For Carb Cap
This plastic carbonation cap has been designed to suit soda bottles, coke bottles, and FermZilla lids.
2” Tri-Clamp Sight Glass with Pyrex Glass | Spike Brewing
Spike's engineers have totally redesigned the 2" TC sight glass from the ground up! Standard sight glasses use 4 long bolts that need to be tigh...
View full detailsSpike Brewing | Conical Fermenter Leg Extensions
The shorty leg extensions are 9” long (compared to 18”). They were specifically designed to be used with the 2” sight glass in the vertical arrange...
View full detailsSpike Brewing | 2” Tri-Clamp to 5/8” Barb
Not all hose barbs are created equal! Spike's special 2" TC x barb fitting features a shorter profile and over sized diameter barb. The over sized ...
View full detailsGrainfather Conical | Cooling Pump Kit
Temperature control is one of the most crucial elements for producing a good quality beer. It needs to be regulated and stable throughout the whole...
View full detailsSpike Brewing | Conical Heater
Need to heat your conical during the long Winter months? Want to make a Belgian ale with notes of pears, bananas, bubblegum, anise or even rose pet...
View full details4” Tri-Clover Silicone Gasket | Spike Brewing
Spike Brewing's 4” TC gaskets are made of FDA approved EPDM. These will work with both our conicals and kettle applications. These gaskets are rate...
View full detailsGrainfather | Glycol Chiller Connection Kit
This connection kit allows you to connect additional Grainfather Conical Fermentors to the Grainfather Glycol Chiller. The Glycol chiller includes ...
View full detailsSpike Brewing | Oxygenation Kit
An oxygenation kit specifically designed for homebrewing. Oxygenate your wort easily and conveniently with a precise amount of oxygen rather than...
View full detailsSpike Brewing | Stainless Steel Blow-Off Cane - 1.5" TC
Designed to keep oxygen out during fermentation, the stainless-steel Blow-off Cane can go directly into a bucket of sanitizer during primary ferme...
View full detailsSpike Brewing | 2” Tri-Clamp to Quick Connect
Out of all the ways to attach silicone tubing to your brew kettle or conical we like quick connect ball lock fittings the most. The ease of connect...
View full detailsSpike Brewing | 3 Port Lid for Conicals and Flex Fermentors
They say three is always better than one, and we agree. Now offering the Spike 3-Port Lid for Flex, Flex+ and Conicals! The new 3 port lid comes wi...
View full detailsSpike Brewing | Inline Pyrex Sight Glass - 1.5” Stainless Steel Tri-Clamp
Spike's engineers have totally redesigned the 1.5" TC sight glass from the ground up! Standard sight glasses use 4 long bolts that need to be ti...
View full detailsSpike Brewing | Flex Heater
Need to heat your Flex during the long Winter months? Want to make a Belgian ale with notes of pears, bananas, bubblegum, anise or even rose petals...
View full detailsSpike Brewing | Tri-Clamp Elbow - 90 Degree 1.5" TC X 5/8" Barb
This elbow will connect to any 1.5" TC port. It features an oversized barb designed to use with 1/2" tubing. This creates a full port opening for ...
View full detailsSpike Brewing | Pressure Relief Valve (PRV) for Spike Gas Manifold (15 psi)
When pressurizing your Spike Conical you'll always want to use a pressure relief valve (PRV). This will prevent the tank from being over pressuriz...
View full detailsBottom Drain Racking Arm 1.5" Tri-Clover | Spike Brewing
Tank Racking Arm Attach this racking arm to the racking port on your bottom drain Tank Boil Kettle or Solo to ensure only the highest quality wor...
View full detailsPropylene Glycol (4 Gallons)
4 x Propylene Glycol (1 Gallon) for use with Glycol Chillers
Coolflow DTX Ethylene Glycol for Chillers (1 Gallon)
Description: High Efficiency Non Toxic Coolant /Antifreeze. Coolflow DTX has been especially formulated to exploit the advantages Ethylene Glycol ...
View full detailsSpike Brewing | Inkbird Digital Temperature Controller for TC-100
The Spike dual stage temperature controller is an easy to use and economical controller that is perfect for home brewing. Spike controllers allow y...
View full detailsSpike Brewing | Tri-Clamp Carb Stone and PRV Bundle
"If you didn't already know the Spike Conical is a unitank! This means it is designed to handle pressures up to 15psi. This capability allows y...
View full detailsLeveling Feet | Spike Brewing (Set of 3)
Keep your fermenter stable and standing straight with the Spike leveling feet! Spike's leveling feet utilize a non-marking bottom so your floor won...
View full detailsSpike Brewing | Replacement Pressure Gauge (PRV & Manifold)
This pressure gauge with a 2” face makes it easy to read the pressure inside your fermenter. Designed to be the toughest out there, this ...
View full detailsSpike Brewing | Essentials Conical Accessory Kit
This Kit includes all the essentials for your New Spike Conical Fermentor! Included accessories are compatible with all sizes of Spike fermentor...
View full detailsBlichmann | FERMENATOR™ G4 - Caster Kits
The optional casters and front/rear-mounted handles make mobility easy. Working on uneven or rough surfaces? Add the caster extension frames for ...
View full detailsBlichmann | FERMENATOR™ G4 - Leg Extensions
The optional casters and front/rear-mounted handles make mobility easy. Working on uneven or rough surfaces? Add the caster extension frames for ...
View full detailsBlichmann | Aromanator
Allows for full purge of hops from the bottom up for true oxygen-free dry-hopping. Oxygen can cause off-flavors in beer, and this can help eliminat...
View full detailsBlichmann | CORNICAL™ UNITANK - Conical Fermenter Fermentation Kit and Keg
The Cornical™ Unitank is a unique fermentation and kegging system like nothing on the market. How does it all work? We offer the modular keg and th...
View full detailsGlycol Chiller | ChillPro 3200H with One Vane Pump (3200 BTUs - 125' Run)
This commercial glycol chiller is a great solution for long-draw systems in bars, restaurants, stadiums or outdoor events. With a maximum distanc...
View full detailsGlycol Chiller | ChillPro 3200H with Two Vane Pumps (3200 BTUs - 125' Run)
This commercial glycol chiller is a great solution for long-draw systems in bars, restaurants, stadiums or outdoor events. With a maximum distanc...
View full detailsGlycol Chiller | ChillPro 3200V with Two Vane Pumps (3200 BTUs - 125' Run)
This glycol beer line chiller is the ideal solution for beer pubs and restaurants looking to optimize their long-draw draft beer dispensing syste...
View full details