All Products
Spike Brewing | Stainless Steel Female Quick Connect to 5/8” Barb
Out of all the ways to attach silicone tubing to your brew kettle we like quick connect fittings the most. The ease of connecting/disconnecting an...
View full detailsSpike Brewing | Stainless Steel 1.5” Tri-Clamp to Quick Connect
Out of all the ways to attach silicone tubing to your brew kettle or conical we like quick connect ball lock fittings the most. The ease of connect...
View full detailsSpike Brewing | 1.5” Stainless Steel Tri-Clamp Stainless Steel Thermowell
Spike's thermowell features a 1/4" temp probe opening on the outside which is mounted to a 1.5" TC fitting. This allows it to attach directly to ...
View full details4” Tri-Clamp Stainless Steel Temperature Control Coil | Spike Brewing
Spike's USA made temp control coils are specifically designed for the CF series conicals and extend far enough into the conical to temp control bo...
View full detailsSpike Brewing | Tri-Clamp Carb Stone and Gas Manifold Bundle
"If you didn't already know the Spike Conical is a unitank! This means it is designed to handle pressures up to 15psi. This capability allows y...
View full detailsStainless Steel Male Quick Connect to 1/2” Female NPT Fitting
Out of all the ways to attach silicone tubing to your brew kettle we like quick connect fittings the most. The ease of connecting/disconnecting an...
View full detailsSpike Brewing | Steam Condenser Lid
Built to transform steam into liquid during the boil, our steam condenser lid will enable you to brew inside without worrying about moisture colle...
View full detailsSpike Brewing | FLEX 7 Gallon Stainless Steel Conical Fermenter
The most “Flex-ible" fermenter on the market. A huge step up from a standard carboy, the Flex product line is made from 304 stainless steel, so scr...
View full detailsSpike Brewing | Insulated Conical Jacket
Spike's insulated conical jacket uses high quality, extra thick, yet flexible neoprene material to insulate your conical from the worst ambient con...
View full detailsSpike Brewing | Stainless Steel 3 Piece Ball Valve - 1/2” Male NPT
Spike's 1/2” stainless steel ball valve screws directly into their brew kettles, no need for an additional nipple to make the connection like compe...
View full detailsSpike Brewing | Non-Adjustable Thermometer - ½” Male NPT with 3” Face
This 1/2” NPT Brew Thermometer is ready to screw directly into the kettle. This 2.5” stemmed thermometer can cover 40-220 degree F ranges. The 3” g...
View full detailsSpike Brewing | Caster Wheel Kits
Fermenters and bottom drain Tanks aren't supposed to be lifted when full, so if you must move it how are you going to do it? Easy! Pick yourself u...
View full detailsStainless Steel 1/2” Male NPT Plug
This square head plug has 1/2" NPT threads and is made from 304 stainless steel. It can be used to plug any of the 1/2" NPT couplers Spike welds o...
View full detailsSpike Brewing | Stainless Steel 5/8” Shorty Pickup Tube - NPT
Spike's special 5/8" pickup tube flows up to 4x better than competitors' 1/2" size. These 5/8" tubes work perfectly with full port valves which ha...
View full detailsSpike Brewing | Adjustable Thermometer - ½” Male NPT with 3” Face
This adjustable face dial thermometer can be orientated 360 degrees so reading the thermometer is easier. This 1/2” NPT Brew Thermometer is ready ...
View full detailsSpike Brewing | False Bottom for Spike+ Kettle
The Spike+ false bottom is for use with our Spike+ line which uses TC fittings. For our standard Spike kettle line that uses NPT fittings please s...
View full detailsSpike Brewing | Replacement Seals - TC Sample Valve
Set of replacement Silicone Seals for Spike Brewing's 1.5 inch TC Sample Port Kit includes 3x seals (as pictured) FDA Approved Stainless Steel S...
View full detailsSpike Brewing | Tank - Stainless Steel Boil Kettle
Meet the last kettle you'll ever need. We call it the Tank for a reason - it's a beast! The Tank features a domed bottom for complete draining and...
View full detailsSpike Brewing | Stainless Steel 5/8” Center Pickup Tube for 10 Gallon Kettle - NPT
Spike's special 5/8" pickup tube flows up to 4x better than competitors' 1/2" size. These 5/8" tubes work perfectly with full port valves which ha...
View full detailsSpike Brewing | 1.5" Butterfly Valve Seat
After years of using 1.5” butterfly style valves, the gasket inside tends to wear and not seal as well. This 1.5” valve seat is available as rep...
View full detailsSpike Brewing | Stainless Steel 5/8” Center Pickup Tube for 50 Gallon Kettle - NPT
Spike's special 5/8" pickup tube flows up to 4x better than competitors' 1/2" size. These 5/8" tubes work perfectly with full port valves which ha...
View full detailsSpike Brewing | Stainless Steel 5/8” Centre Pickup Tube for 20 Gallon Kettle - TC
The Spike+ centre pickup is specially designed to work with our Spike+ line of kettles. The dual 1.5" TC flange allows the pickup tube to attach t...
View full detailsSpike Brewing | 2" Butterfly Valve Seat
After years of using 2” butterfly style valves, the gasket inside tends to wear and not seal as well. This 2” valve seat is available as replacem...
View full detailsSpike Brewing | Wort Chiller Essentials Kit
Speed up your Brew Day with the NEW Spike counterflow wort chiller. The hot wort flows through the inner convoluted copper tubing, while cold wate...
View full detailsSpike Brewing | HERMS Coil TC Compression Fitting x1
For use if converting a NPT HERMS coil to TC HERMS Coils (Heat Exchange Recirculating Mash System) are usually installed in your hot liquor tank. ...
View full detailsSpike Brewing | 1.5 Tri-Clover Racking Arm
Another cool product Spike's engineers and in-house welders developed is this USA made racking arm. This racking arm provides 6" of total travel a...
View full detailsSpike Brewing | 3 Port Stainless Steel Gas Manifold Bundle for Spike Conical Fermentors
Designed to attach directly to the 1.5" TC port on your fermenter's lid, this manifold allows you to easily add pressure for transferring to kegs...
View full detailsSpike Brewing | CIP Spray Ball - 1.5” Tri-Clover
Another cool innovation from the Spike engineers; a low pressure CIP ball! They wanted to design a CIP ball that didn’t require home brewers to pu...
View full detailsClosed Pressure Transfer Kit | Spike Brewing
Spikes closed pressure transfer kit (CPT kit) will allow you to rack your beer from your conical to keg without exposing it to the air. This wi...
View full details2” Tri-Clamp Sight Glass with Pyrex Glass | Spike Brewing
Spike's engineers have totally redesigned the 2" TC sight glass from the ground up! Standard sight glasses use 4 long bolts that need to be tigh...
View full detailsSpike Brewing | Conical Fermenter Leg Extensions
The shorty leg extensions are 9” long (compared to 18”). They were specifically designed to be used with the 2” sight glass in the vertical arrange...
View full detailsSpike Brewing | 2” Tri-Clamp to 5/8” Barb
Not all hose barbs are created equal! Spike's special 2" TC x barb fitting features a shorter profile and over sized diameter barb. The over sized ...
View full detailsSpike Brewing | Flow Brew Pump
The Spike Flow, available in NPT and TC fittings, is the newest and most badass brew pump ever to hit homebrewing. With best in class pressure, flo...
View full detailsSpike Brewing | Conical Heater
Need to heat your conical during the long Winter months? Want to make a Belgian ale with notes of pears, bananas, bubblegum, anise or even rose pet...
View full detailsSpike Brewing | CF5 - 7 Gallon Conical Fermenter
Professional and innovative by design, the Spike Conical Fermenters (CF) provide the highest quality level of fermentation, no matter if you have a...
View full details4” Tri-Clover Silicone Gasket | Spike Brewing
Spike Brewing's 4” TC gaskets are made of FDA approved EPDM. These will work with both our conicals and kettle applications. These gaskets are rate...
View full detailsSpike Brewing | Oxygenation Kit
An oxygenation kit specifically designed for homebrewing. Oxygenate your wort easily and conveniently with a precise amount of oxygen rather than...
View full details1.5" Tri-Clamp Thermometer | Spike Brewing
This 1.5" TC thermometer will connect directly to the 1.5" port on your kettle. There is no need for a thermowell which allows for quicker more ac...
View full detailsSpike Brewing | Stainless Steel Blow-Off Cane - 1.5" TC
Designed to keep oxygen out during fermentation, the stainless-steel Blow-off Cane can go directly into a bucket of sanitizer during primary ferme...
View full detailsSpike Brewing | Stainless Steel 5/8” Side Pickup Tube - TC
The Spike+ side pickup is specially designed to work with our Spike+ line of kettles. The dual 1.5" TC flange allows the pickup tube to attach to ...
View full detailsSpike Brewing | 2” Tri-Clamp to Quick Connect
Out of all the ways to attach silicone tubing to your brew kettle or conical we like quick connect ball lock fittings the most. The ease of connect...
View full detailsSpike Brewing | 3 Port Lid for Conicals and Flex Fermentors
They say three is always better than one, and we agree. Now offering the Spike 3-Port Lid for Flex, Flex+ and Conicals! The new 3 port lid comes wi...
View full detailsSpike Brewing | Inline Pyrex Sight Glass - 1.5” Stainless Steel Tri-Clamp
Spike's engineers have totally redesigned the 1.5" TC sight glass from the ground up! Standard sight glasses use 4 long bolts that need to be ti...
View full detailsSpike Brewing | CF10 - 14 Gallon Conical Fermenter
Professional and innovative by design, the Spike Conical Fermenters (CF) provide the highest quality level of fermentation, no matter if you have a...
View full detailsSpike Brewing | Solo System - Flat
Designed to be compact and turn-key, our single-vessel system enables you to brew all-grain while keeping your equipment footprint small. The Sol...
View full detailsSpike Brewing | Flex Heater
Need to heat your Flex during the long Winter months? Want to make a Belgian ale with notes of pears, bananas, bubblegum, anise or even rose petals...
View full detailsSpike Brewing | Tri-Clamp Elbow - 90 Degree 1.5" TC X 5/8" Barb
This elbow will connect to any 1.5" TC port. It features an oversized barb designed to use with 1/2" tubing. This creates a full port opening for ...
View full detailsStainless Steel Female Quick Connect to 1/2” Barb
The female quick connect seals up very well without a lot of work when connecting. Will work with other SS quick connects (although, it does not w...
View full details