Equipment | All Grain

For use if converting a NPT HERMS coil to TC HERMS Coils (Heat Exchange Recirculating Mash System) are usually installed in your hot liquor tank. ...

Made from food-grade nylon. Strain the juice from loose fruit pulp before or after initial fermentation or use as a beer wort sparging bag or large...

10 cm diameter: Small Food-grade plastic funnel for transferring liquids or topping up bottles.

All-in-One Brewing Hero: 24" Stainless Steel Spoon & Bottle Opener This isn't your grandma's spoon! This giant 24" stainless steel workhorse ta...

Food grade plastic paddle can tolerate contact with boiling temperatures. The smaller end fits into carboy necks.

A hop spider produces clearer beer, makes multiple and large hop additions to the boil easier than using hop bags, and make clean-up quicker. Featu...

The Grainfather Sparge Water Heater is a temperature controlled urn that allows you to heat up to 18.2 Liters (4.8 US Gal) of water. This makes the...

Efficient Mashing: 24" Stainless Steel Paddle with Break-Up Holes Effortless Mixing & Degassing: This 24" stainless steel paddle lets you eff...

Another cool product Spike's engineers and in-house welders developed is this USA made racking arm. This racking arm provides 6" of total travel a...

This heat insulation jacket is designed to be used with the Grainfather to keep heat contained in the boiler and maintain a constant temperature du...

Designed to attach directly to the 1.5" TC port on your fermenter's lid, this manifold allows you to easily add pressure for transferring to kegs...

The Grainfather Whirlpool and Aeration Brewing Paddle provides an excellent whirlpool by allowing the perfect amount of liquids and solids to pas...

Another cool innovation from the Spike engineers; a low pressure CIP ball! They wanted to design a CIP ball that didn’t require home brewers to pu...

*** Note: this bundle does not include the T500 boiler. If the boiler is desired in addition, please see this product here *** ---- This alembic co...

Spikes closed pressure transfer kit (CPT kit) will allow you to rack your beer from your conical to keg without exposing it to the air. This wi...

Use in conjunction with the Grainfather Connect Control Box thermometer, for accurate control of your wort transfer temperature through the Grainfa...

Discover the art and science of craft distilling your own vapour infused spirits with the T500 Reflux or Alembic Stills. Instructions: 1. Make and ...

Propylene glycol is the active cooling ingredient used in the Grainfather Glycol Chiller. You will need 3 liters of glycol for the chiller. Chiller...

Spike's engineers have totally redesigned the 2" TC sight glass from the ground up! Standard sight glasses use 4 long bolts that need to be tigh...

The shorty leg extensions are 9” long (compared to 18”). They were specifically designed to be used with the 2” sight glass in the vertical arrange...

Moves coolant from the reservoir to the fermenter. Uses DC power which is much safer than an AC powered submersible pump.  All pumps are n...

Easily attach to the Grainfather Conical Fermenter (or any fermenter with a 1.5" tri-clamp opening) for a clean and simple way to transfer your be...

12 cm diameter: Medium-sized Food-grade plastic funnel for transferring liquids or topping up bottles/carboys. Small Food-grade plastic filter with...

"At Spike we love quick connect fittings. Why use tools when you don't need to!? These 90° quick connect fittings will make attaching insulated t...

The TC100 temp control system will manage both cooling and heating of your Spike Conical. The digital controller's temp probe will feed int...

The Spike All-In-One Pressure Relief Valve (PRV) puts your safety first without compromising on features or functionality. And when you're dealin...

Another Spike innovation that we think solves two big issues. The obvious benefit from insulated lines is increasing your cooling efficiency from ...

For all the brewers out there who’ve switched from clear carboys to stainless we hear this unanimous complaint: I can't see my beer fermenting any...

Out of all the ways to attach silicone tubing to your brew kettle we like quick connect ball lock fittings the most. The ease of connecting/discon...

Spike's conicals come equipped with this 100% sanitary 1.5” TC butterfly valve. This valve has a squeeze locking/trigger handle that allows for 180...

The Female Garden Hose Thread with  ½" Barb allows you to create your own length of hose specific for your brewing needs. Attach the tubing to the ...

Heat your kettle with Spike's electric heating element. Specs: 240 Volt/5500w (120v/1350W) 1.5" TC stainless element (comes with TC gasket and cl...

The Grainfather Conical Fermenter Coat is the perfect fitment for those in a climate that experiences high condensation rates.

Control your fermentation temperature accurately, every time! Temperature control is one of the most crucial elements for producing a good quality ...

Spare lid for the T-500. Also fits the Grainfather and Brewzilla allowing you to use of the Still Spirits Reflux Condenser on top of the Grainfathe...

Made from food-grade Nylon. 23" x 24".  Coarse - Whole spices, coffee beans, fruit peels, fresh or frozen fruit, leaf hops Medium - Milled grains, ...

If you didn't already know the Spike Conical is a unitank! This means it is designed to handle pressures up to 15psi. This capability allows yo...

Not all hose barbs are created equal! Spike's special 1.5" TC x barb fitting features a shorter profile and over sized diameter barb. The over siz...

Has both male & female threads. Cleaning tips for stainless steel products: don't use chlorine or any sanitizing solution that contains chlori...

The Flex+ is the big brother to the standard Flex. Out of the box, it features an upgraded tri-clamp racking arm, tri-clamp butterfly valve and upg...

Not all hose barbs are created equal! Spike's special 2" TC x barb fitting features a shorter profile and over sized diameter barb. The over sized ...