Newest Products

After years of using 1.5” butterfly style valves, the gasket inside tends to wear and not seal as well.  This 1.5” valve seat is available as rep...

1.5" Tri Clamp to Ball Lock Gas Post - 19/32   You can attach a gas ball lock disconnect to  a 1.5 "TC port.  The ball lock post is removable from...

Attach Instruments and Pressurize with Ease: 1.5" Tri-Clamp x 1/4" MFL/FFL Adapter This versatile 1.5" tri-clamp x 1/4" MFL/FFL adapter is your one...

Spray Ball for Clean in Place Systems, or can be used during sparge. Connects to 1.5" Tri-Clamp fittings.

This 1.5" tri-clamp butterfly valve with a squeeze-trigger lock offers a compelling option for homebrewers seeking a balance between on/off flow co...

Tri-Clamp Silicone Gasket 1.5"

Secure Your Connection: 1.5" Tri-Clamp Clamp This 1.5" tri-clamp clamp is an essential partner for your tri-clamp fittings (sold separately) in you...

This space-saving 1.5" Tri-Clamp Ferrule, measuring just 0.875 inches in length, is your go-to solution for creating compact tri-clamp connection p...

This versatile 1.5" tri-clamp x ½" female NPT adapter is your bridge between the worlds of tri-clamp and threaded connections in your homebrew setu...

This versatile 1.5" tri-clamp x ½" male NPT adapter is your bridge between the worlds of tri-clamp and threaded connections in your homebrew setup!...

This 1.5" tri-clamp x ½" hose barb is your go-to solution for connecting hoses directly to your tri-clamp system in your homebrew setup! Effortle...

Streamline Your Flow: 1.5" Sanitary Butterfly Valve with Locking Handle This 1.5" sanitary butterfly valve is a workhorse for your homebrew setup, ...

This is a 304 stainless steel ball valve for a 1.5″ process flow passageway with 1.5″ tri-clamp ends.

This is a 304 stainless steel ball valve for a 1.5″ process flow passageway with 1.5″ tri-clamp ends.

Smooth Transitions: 3" to 1.5" Tri-Clamp Reducer This stainless steel reducer seamlessly connects your 3" and 1.5" tri-clamp pipes. The conical des...

This 304 stainless steel 2″ diameter elbow connects to your system via tri-clamp, allowing liquid or vapour to be redirected by 45 degrees. Sharp...

This 304 stainless steel 1.5″ diameter elbow connects to your system via tri-clamp, allowing liquid or vapour to be redirected by 45 degrees. Sha...

This set provides a secure, leak-free connection between the two pieces of equipment, while allowing for easy disassembly and cleaning as needed....

Tank Racking Arm Attach this racking arm to the racking port on your bottom drain Tank Boil Kettle or Solo to ensure only the highest quality wor...

Vintner™ is primarily for liquid transfer. Used for the transfer of wine, beer, potable water and other non-oily, liquid foodstuffs. The Monofilame...

Spike's engineers have totally redesigned the 1.5" TC sight glass from the ground up! Standard sight glasses use 4 long bolts that need to be ti...

This 1.5" TC thermometer will connect directly to the 1.5" port on your kettle. There is no need for a thermowell which allows for quicker more ac...

This elbow will connect to any 1.5" TC port. It features an oversized barb designed to use with 1/2" tubing. This creates a full port opening for ...

This 1.5" Tri-Clamp Ferrule, measuring 1.125 inches in length, is the building block for creating custom ports and connections in your homebrew set...

This handy 1.5" tri-clamp extension tube is your secret weapon for adding extra reach to your homebrew setup! Extended Connections: Effortlessly ...

This 1.5" tri-clamp extension tube, with its generous 18-inch length, is the ultimate solution for maximizing reach and flexibility in your homebre...

Smooth Transitions: 2" to 1.5" Tri-Clamp Reducer This stainless steel reducer seamlessly connects your 2" and 1.5" tri-clamp pipes. The conical des...

This 1.5" tri-clamp elbow is your secret weapon for navigating tight spaces and creating efficient flow paths in your homebrew setup! Sharp 90° T...

This 1.5" tri-clamp cap, crafted from high-quality stainless steel, is your trusty companion for sealing unused ports on your tri-clamp system in y...

Make Smooth Turns and Easy Connections: 1.5" Tri-Clamp x 3/4" Hose Barb (90°) This 1.5" tri-clamp x 3/4" hose barb with a 90-degree bend is a must-...

The RipTide™ is the very first pump designed specifically for homebrewing, and it’s the last pump you’ll ever need! Gone are the days of making do ...

This 4" to 1.5" end cap reducer will make it possible to plumb your yeast brink in line for CIP, or direct pitching purposes. Concentric reducer f...

Not all hose barbs are created equal! Spike's special 1.5" TC x barb fitting features a shorter profile and over sized diameter barb. The over siz...

Monitor Your Brews with Precision: Stainless Steel Sanitary Pressure Gauge (0-58 PSI) This high-quality stainless steel sanitary pressure gauge is ...

This handy 1.5" tri-clamp sample valve with a 90-degree hose barb is your secret weapon for easily extracting wort samples throughout your brewing ...