Pumps & Hardware

The RipTide™ is the very first pump designed specifically for homebrewing, and it’s the last pump you’ll ever need! Gone are the days of making do ...

Seal the Deal: 2" Stainless Steel Tri-Clamp Cap This 2" tri-clamp cap is your go-to solution for securely closing off unused ports in your homebrew...

Stainless Steel Hose barb. 1/2" barb with 1/2" FPT connection. 304 Stainless Steel. Secure Hose Connection: The 1/2" barb creates a leak-proof se...

This plastic carbonation cap has been designed to suit soda bottles, coke bottles, and FermZilla lids.

Spike's engineers have totally redesigned the 2" TC sight glass from the ground up! Standard sight glasses use 4 long bolts that need to be tigh...

Moves coolant from the reservoir to the fermenter. Uses DC power which is much safer than an AC powered submersible pump.  All pumps are n...

This 1.5" tri-clamp elbow is your secret weapon for navigating tight spaces and creating efficient flow paths in your homebrew setup! Sharp 90° T...

Spike's USA made temp control coils are specifically designed for the CF series conicals and extend far enough into the conical to temp control bo...

Type E Adapters are typically used with Type C Couplers, but can also be used with Type B and D Couplers or DC (Dust Cap) of the same size.

For all the brewers out there who’ve switched from clear carboys to stainless we hear this unanimous complaint: I can't see my beer fermenting any...

Out of all the ways to attach silicone tubing to your brew kettle we like quick connect ball lock fittings the most. The ease of connecting/discon...

This tee is a stainless steel t-shaped pipe fitting with three National Pipe Taper (NPT) female run connections.  The fitting has NPT threads for c...

This 2" tri-clamp ferrule is a workhorse for creating permanent connections in your homebrew setup or sanitary pipeline system. Here's how it works...

Use this inline ball valve to shut off the flow in your beer or air line. Simply secure it with screw or tab clamps and you'll be in control in no ...

This beer line hose splicer is for splicing together two 5/16" I.D. vinyl hose to a 1/4" I.D. polyethylene hose or a 1/4" I.D. polyethylene hose to...

Smooth Transitions: 2" to 1.5" Tri-Clamp Reducer This stainless steel reducer seamlessly connects your 2" and 1.5" tri-clamp pipes. The conical des...

This handy 1.5" tri-clamp sample valve with a 90-degree hose barb is your secret weapon for easily extracting wort samples throughout your brewing ...

Not all hose barbs are created equal! Spike's special 1.5" TC x barb fitting features a shorter profile and over sized diameter barb. The over siz...

High-Flow Design: The 1/2" street elbow allows for a 90-degree turn while maintaining excellent flow rates, perfect for wort transfer or pump app...

Not all hose barbs are created equal! Spike's special 2" TC x barb fitting features a shorter profile and over sized diameter barb. The over sized ...

Temperature control is one of the most crucial elements for producing a good quality beer. It needs to be regulated and stable throughout the whole...

The Spike Flow, available in NPT and TC fittings, is the newest and most badass brew pump ever to hit homebrewing. With best in class pressure, flo...

Spike Brewing's 4” TC gaskets are made of FDA approved EPDM. These will work with both our conicals and kettle applications. These gaskets are rate...

This 1.5" Tri-Clamp Ferrule, measuring 1.125 inches in length, is the building block for creating custom ports and connections in your homebrew set...

This 1.5" TC thermometer will connect directly to the 1.5" port on your kettle. There is no need for a thermowell which allows for quicker more ac...

Make Smooth Turns and Easy Connections: 1.5" Tri-Clamp x 3/4" Hose Barb (90°) This 1.5" tri-clamp x 3/4" hose barb with a 90-degree bend is a must-...

This handy 1.5" tri-clamp extension tube is your secret weapon for adding extra reach to your homebrew setup! Extended Connections: Effortlessly ...

Monitor Your Brews with Precision: Stainless Steel Sanitary Pressure Gauge (0-58 PSI) This high-quality stainless steel sanitary pressure gauge is ...

Route your gas connection into your kegerator or keezer from an external CO2 tank/regulator like a professional. This bulkhead installs through a f...

Out of all the ways to attach silicone tubing to your brew kettle or conical we like quick connect ball lock fittings the most. The ease of connect...

This stainless steel bulkhead kit lets you easily install a valve (sold separately) on your kettle or keg: 1" Bulkhead: Creates a secure attachme...

Spike's engineers have totally redesigned the 1.5" TC sight glass from the ground up! Standard sight glasses use 4 long bolts that need to be ti...

Versatile Flow Management      The tee design allows you to: Split a single line: Distribute gas or beer to two separate kegs, maximizing efficie...

This elbow will connect to any 1.5" TC port. It features an oversized barb designed to use with 1/2" tubing. This creates a full port opening for ...

This 1.5" tri-clamp extension tube, with its generous 18-inch length, is the ultimate solution for maximizing reach and flexibility in your homebre...

The female quick connect seals up very well without a lot of work when connecting. Will work with other SS quick connects (although, it does not w...

Looking for the perfect 2” sanitary valve for your conical? Well look no further! These valves are commonly seen in professional breweries due to t...

A standard clamp for all 4" TC ports. Designed for Spike Conical lids. Specs:  4" Tri-Clover Clamp 304SS

Durable Stainless Steel: Resists corrosion, perfect for handling wort, coolant, and cleaning solutions. High-Pressure Performance: The twin fer...