Skip to content

Spike Brewing | CF10 Gallon Conical Fermenter with TC100 Temperature Control Bundle

Save $40.00 Save $40.00
Original price $1,729.99
Original price $1,729.99 - Original price $1,729.99
Original price $1,729.99
Current price $1,689.99
$1,689.99 - $1,689.99
Current price $1,689.99

What's Included:

Professional and innovative by design, the Spike Conical Fermenters (CF) provide the highest quality level of fermentation, no matter if you have a full-scale brewery or a space in your garage. Along with the new TC100 Temp Control System, you'll have everything you need to Elevate Your Brew Day!

CF10 - 14 Gallon Conical Fermenter


  • 304 stainless steel; 1.2mm (18ga)
  • All sanitary welded ports (no-weldless fittings)
  • All hardware shown here is included!
  • Designed for 5 to 10gal batches
  •      - 14 gal total capacity
  • 15psi working pressure (always use a 15psi pressure relief valve)
  •      - Use for pressure transfers
  •      - Use as a brite tank
  • Etched volume markings
  • 17" wide by 35" tall
  • Fully polished finish

Lid Features:

  • Stainless band clamp for attaching the lid
  •      - Completely removable lid for easy cleaning
  • 4" TC modular top port
  •      - Allows for hop additions, temp control coil, top sight glass, etc
  • (3) 1.5" TC ports which allow for: 
Blow Off Port – Dedicated port for an airlock or blow off tube
Hop Port – Dedicated port for adding hops
PRV Port – Dedicated port for your pressure relief valve (PRV)

Body Features:

  • Huge 2" TC bottom dump with butterfly valves (no more stuck yeast dumps)
  • 1.5" TC racking port with butterfly valve
  • 1.5" TC sample valve (for taking gravity readings)
  • 1.5" TC dial thermometer

TC-100 Heating and Cooling Bundle


The TC100 temp control system will manage both cooling and heating of your Spike Conical. The digital controller's temp probe will feed into the included thermowell on our CF Series Conical. Also included is a specially fitted neoprene jacket which features reinforced port holes to reduce the chance of ripping during install. Last (and maybe the coolest item) is special insulated tubing. This almost eliminates tube cooling losses and will prevent your cooling lines from sweating all over your floor!

Cooling:
When the temp in the conical rises above the set point it will turn on the pump submerged in your cold water reservoir (bucket of ice water, dorm fridge, aquarium or glycol chiller, DIY AC chiller, etc). This will pump cold water/glycol through the temp control coil, which mounts to the lid, cooling your beer until it reaches the controller set point.

Heating:
When the temp in the conical falls below the controller set point the optional heater will kick on warming the unit up. 

Detailed product guide:
Product Guide.pdf

TC100 Package:

  • Digital closed loop controller (heating and cooling)
  • Insulated tubing (more efficient and no more sweaty tubes!
  • Temp control coil
  • Thermowell
  • Neoprene insulated jacket 
  • Submersible pump (pumping cold water through the temp coil)
  • Temp Coil Quick Connect Fittings
  • Heater (for us northern brewers)

Additional conical accessories can be seen HERE