Shop by Brand

Out of all the ways to attach silicone tubing to your brew kettle we like quick connect fittings the most. The ease of connecting/disconnecting an...

Out of all the ways to attach silicone tubing to your brew kettle or conical we like quick connect ball lock fittings the most. The ease of connect...

Spike's thermowell features a 1/4" temp probe opening on the outside which is mounted to a 1.5" TC fitting. This allows it to attach directly to ...

Out of all the ways to attach silicone tubing to your brew kettle we like quick connect fittings the most. The ease of connecting/disconnecting an...

Built to transform steam into liquid during the boil, our steam condenser lid will enable you to brew inside without worrying about moisture colle...

The most “Flex-ible" fermenter on the market. A huge step up from a standard carboy, the Flex product line is made from 304 stainless steel, so scr...

This 1/2” NPT Brew Thermometer is ready to screw directly into the kettle. This 2.5” stemmed thermometer can cover 40-220 degree F ranges. The 3” g...

Fermenters and bottom drain Tanks aren't supposed to be lifted when full, so if you must move it how are you going to do it? Easy! Pick yourself u...

This square head plug has 1/2" NPT threads and is made from 304 stainless steel. It can be used to plug any of the 1/2" NPT couplers Spike welds o...

Spike's special 5/8" pickup tube flows up to 4x better than competitors' 1/2" size. These 5/8" tubes work perfectly with full port valves which ha...

Set of replacement Silicone Seals for Spike Brewing's 1.5 inch TC Sample Port Kit includes 3x seals (as pictured) FDA Approved Stainless Steel S...

Meet the last kettle you'll ever need. We call it the Tank for a reason - it's a beast! The Tank features a domed bottom for complete draining and...

After years of using 1.5” butterfly style valves, the gasket inside tends to wear and not seal as well.  This 1.5” valve seat is available as rep...

Speed up your Brew Day with the NEW Spike counterflow wort chiller. The hot wort flows through the inner convoluted copper tubing, while cold wate...

After years of using 2” butterfly style valves, the gasket inside tends to wear and not seal as well. This 2” valve seat is available as replacem...

For use if converting a NPT HERMS coil to TC HERMS Coils (Heat Exchange Recirculating Mash System) are usually installed in your hot liquor tank. ...

Another cool product Spike's engineers and in-house welders developed is this USA made racking arm. This racking arm provides 6" of total travel a...

Designed to attach directly to the 1.5" TC port on your fermenter's lid, this manifold allows you to easily add pressure for transferring to kegs...

Another cool innovation from the Spike engineers; a low pressure CIP ball! They wanted to design a CIP ball that didn’t require home brewers to pu...

Spikes closed pressure transfer kit (CPT kit) will allow you to rack your beer from your conical to keg without exposing it to the air. This wi...

Spike's engineers have totally redesigned the 2" TC sight glass from the ground up! Standard sight glasses use 4 long bolts that need to be tigh...

The shorty leg extensions are 9” long (compared to 18”). They were specifically designed to be used with the 2” sight glass in the vertical arrange...

Moves coolant from the reservoir to the fermenter. Uses DC power which is much safer than an AC powered submersible pump.  All pumps are n...

"At Spike we love quick connect fittings. Why use tools when you don't need to!? These 90° quick connect fittings will make attaching insulated t...

Spike's USA made temp control coils are specifically designed for the CF series conicals and extend far enough into the conical to temp control bo...

The TC100 temp control system will manage both cooling and heating of your Spike Conical. The digital controller's temp probe will feed int...

The Spike All-In-One Pressure Relief Valve (PRV) puts your safety first without compromising on features or functionality. And when you're dealin...

Another Spike innovation that we think solves two big issues. The obvious benefit from insulated lines is increasing your cooling efficiency from ...

For all the brewers out there who’ve switched from clear carboys to stainless we hear this unanimous complaint: I can't see my beer fermenting any...

Out of all the ways to attach silicone tubing to your brew kettle we like quick connect ball lock fittings the most. The ease of connecting/discon...

Spike's conicals come equipped with this 100% sanitary 1.5” TC butterfly valve. This valve has a squeeze locking/trigger handle that allows for 180...

Heat your kettle with Spike's electric heating element. Specs: 240 Volt/5500w (120v/1350W) 1.5" TC stainless element (comes with TC gasket and cl...

If you didn't already know the Spike Conical is a unitank! This means it is designed to handle pressures up to 15psi. This capability allows yo...

Not all hose barbs are created equal! Spike's special 1.5" TC x barb fitting features a shorter profile and over sized diameter barb. The over siz...

The Flex+ is the big brother to the standard Flex. Out of the box, it features an upgraded tri-clamp racking arm, tri-clamp butterfly valve and upg...

Not all hose barbs are created equal! Spike's special 2" TC x barb fitting features a shorter profile and over sized diameter barb. The over sized ...

The Spike Flow, available in NPT and TC fittings, is the newest and most badass brew pump ever to hit homebrewing. With best in class pressure, flo...

Need to heat your conical during the long Winter months? Want to make a Belgian ale with notes of pears, bananas, bubblegum, anise or even rose pet...

Professional and innovative by design, the Spike Conical Fermenters (CF) provide the highest quality level of fermentation, no matter if you have a...

An oxygenation kit specifically designed for homebrewing. Oxygenate your wort easily and conveniently with a precise amount of oxygen rather than...